The reputation of our brand is in your hands. We never take this for granted.  We rely on your feedback in order to improve and re-imagine our products.

Welcome to iCrimp world. iCrimp is a sub-brand of IWISS, delivering affordable and high quality electrical & plumbing tools.

Since 2015, iCrimp remains one of  the largest tool brands of commercial grade products. In the dynamic and ever-changing world, iCrimp determines to march further into the global market.

Performance, service life and ergonomics of iCrimp tools are guided by the need to meet the high expectations of plumbers of all skill levels.

iCrimp has come to represent quality, service, and dependability in today’s work place and are widely recognized throughout plumbing, electrical, automotive aftermarket industries.

Just doing a little work on my PEX water lines, found rental for these items would cost more then this product for a weekend rental. So price is awesome. I haven’t used them a tons but I have done some work around the house and work well and feel study. They actually good tools.

–Chris Penney

Purchased to cut bicycle cable in the short term and planning a cable railing project in the future. Tool appears to be quite well-engineered and probably the lesser-expensive iCrimp would have been satisfactory if all I intended to do with it was cut bicycle cable. It does the latter exceedingly well. A few bucks more is worth it to me to have a tool that can cut larger cable if needed. I don’t spend a lot of time cutting cable, but at this price point, I can afford to have the right tool for the job. Hopefully this tool will last a long time.

–Handydan

My boiler was acting funny, the boiler repair man came, said I needed $500 repair. I sent him away, I didnt agree. I spoke to several professionals,. and determined the issue was a $20 check valve issue. The repair would have been very expensive, and soldering pipes in this area would have been a nightmare. I used this tool, made a 15 minute repair, and the boiler is working perfectly. Its a heavy tool, and it takes strength to use, but it paid for itself- twice, in 15 minutes on the first day I owned it.

–David Grudzinski

I am “building” a Whole House Water treating system and “went back and forth” between going from a PEX main to a CPVC set up to a full PEX set up. I then “went back and forth” between going copper crimp rings and stainless cinch rings. After MUCH research and personal experience, I (comfortably) decided on the stainless steel cinch rings and more specifically, this tool… A much better value then a copper ring crimping tool set . Secondly, it is easier to remove the stainless steel rings if one needs to. In what I am doing, I primarily am working with 1″ piping and a little 1/2″. This tool is a good quality for the price.

–T. Ogilvie

This product was great, the price was right as well. I found when cutting the ring of the pex, one cut on one side of the ring, and again on the opposite side, the ring cut very well. However, the fitting would not come out of the pipe well. I put a part of the cut ring back on the pipe and cut it again on a spot 1/4 round off one of the prior cuts and it worked to pop the fitting right out of the pipe. why that works, I don’t know but it does.

–Michael Thomas

I am “building” a Whole House Water treating system and “went back and forth” between going from a PEX main to a CPVC set up to a full PEX set up. I then “went back and forth” between going copper crimp rings and stainless cinch rings. After MUCH research and personal experience, I (comfortably) decided on the stainless steel cinch rings and more specifically, this tool… A much better value then a copper ring crimping tool set . Secondly, it is easier to remove the stainless steel rings if one needs to. In what I am doing, I primarily am working with 1″ piping and a little 1/2″. This tool is a good quality for the price.

–T. Ogilvie